TEL
+86-317-5660915

ADD

Botou city

Hebei province

FAX
+86-317-8330026

SKYPE

WECHAT

ALL RIGHTS RESERVED BOTOU EVER LUCKY ENVIRONMENTAL PROTECTION MACHINERY CO., LTD.    冀ICP备14014540号-2     POWERED BY:WWW.300.CN

Botou Ever Lucky Environmental Protection Machinery Co., Ltd.

MOBILE

CASE

Botou Ever Lucky Environmental Protection Machinery Co., Ltd. (abbreviation: Ever Lucky Machinery) is an professional manufacturer of environmental machinery 

Page view

Chain bucket elevator

没有此类产品
The NE board bucket elevator is a product that has been introduced and developed by foreign advanced technology. It is suitable for vertical conveying of powdery, granular, and massive materials, as well as materials with greater abrasiveness, such as fly ash, slag, limestone, cement raw material, cement clinker, cement, coal, dry clay, etc. The temperature of the material generally does not exceed 250 degrees and the lifting height is up to 40 meters.
The NE plate chain bucket elevator is a plate chain type, gravity-induced discharge hoist device. The machine adopts inflow feeding. The material flows into the hopper and is lifted to the top by the chain of the plate. It discharges itself under the gravity of the material. The chain is a high-strength alloy steel high-strength plate chain that is wear-resistant and reliable, and the hard-tooth surface reducer is used in the drive section.

 

Model number

Capacity(m3/h)

Max Lumpiness

Percentage

10

25

50

75

100

NE15

15

65

50

40

30

25

NE30

32

60

75

58

47

40

NE50

60

90

75

58

47

40

NE100

110

130

105

80

65

55

NE150

170

130

105

80

65

55

NE200

210

170

135

100

85

70

NE300

320

170

135

100

85

70

Components:
The NE board chain bucket elevator consists of running parts, drive units, upper units, middle cabinets, and lower units.
<1> Running parts It consists of a hopper and a special chain. The single-row chain is used for the NE30 and the NE50-NE800 is double-chained.
<2>Drive A variety of drive combinations are used. The drive platform is equipped with a maintenance frame and a railing, and the drive device is divided into two types: left and right.
<3> Upper unit A rail (double-row chain), backstop, and discharge pockets are fitted with anti-return rubber sheets.
<4> The middle section of the middle section is equipped with rails to prevent the chain from swinging during operation.
<5> Lower unit An automatic tensioner is installed.
 
Installation:
NE board chain bucket elevator installation method is as follows
<1> The supporting surface of the lower section of the bucket elevator must be located on the level of the foundation.
<2> The upper drive shaft and the lower tension shaft of the bucket elevator should be in the same vertical plane.
<3> There shall be no significant misalignment at the flange joint of the middle casing.
<4> The position of the hopper on the traction member should be correct and reliable.
<5> After the tensioning device is adjusted properly, the tensioning force necessary for uniform and normal operation of the traction member should be provided.
 
Structural Drawing:
 
 
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article